Right-Angle Data Probe Connector

Standard 5-pin connectors on M. C. Miller data-probes can be customer-replaced by a new right-angle 5-pin connector (Note: Data-probes can also be returned to the M. C. Miller factory for retrofitting). The advantage of the new downward pointing connector is that there is considerably-less strain at the cable/connector interface, which greatly reduces the possibility of the connector, or the cable plug, becoming damaged during use. The kit can be easily spliced with the existing wires and mounted to the probe. Instructions can be found below.

With retrofit

Without retrofit

Separate kits available for green and red handle probes, please be sure to order the correct item.